Omron E2E-X1C1 Standard Proximity Sensor, BNIB, NOS

DC 3-Wire Model , Shielded , M5 , Sensing Distance 1 mm , Operation Mode NO , NPN
 

• Cylinder type sensing head size     M5
• Type     Shielded
• Sensing method     Inductive type
• Sensing distance     1 mm -15% to +15%
• Setting distance     0 to 0.7 mm
• Differential distance     15% Max. of sensing distance
• Sensing object     Ferrous metal (Sensitivity lowers with non-ferrous metals.)
• Standard sensing object     Iron 5*5*1mm
• Response frequency     DC: 3 kHz (average)
• Power supply voltage     12 to 24 VDC (ripple(p-p) :10% Max.)
• Operating voltage range     10 to 30 VDC
• Current consumption     17 mA Max.
• Control output (Output type)     NPN open collector output
• Control output (Switching capacity)     0 to 100 mA (30VDC Max.)
• Control output (Residual voltage)     (DC) 2 V Max. （under load current with cable length of 2m）
• Indicator     Operation indicator(red)
• Operation mode     NO
• Protective circuit     Surge suppressor
• Power supply reverse polarity protection
• Standard or Different frequency     Standard
• Ambient temperature     Operating: -25 to 70 CEL
• Storage: -25 to 70 CEL
• (with no icing or condensation)
• Ambient humidity     Operating: 35 to 95 %RH
• Storage: 35 to 95 %RH
• (with no condensation)
• Temperature influence     +-15% Max. of sensing distance in temperature range of -25 to +70CEL
• (As the basis for sensing distance of 23CEL)
• Voltage influence     +-2.5% Max. of sensing distance in rated voltage range +-15%. (As the basis for sensing distance at standard power voltage)
• Insulation resistance     50 M OHM Min. at 500VDC between charged parts and the case
• Dielectric strength     500 VAC 50/60 Hz for 1 minute between charged parts and the case
• Vibration resistance     10 to 55 Hz, 1.5-mm double amplitude for 2 hours each in X, Y, and Z directions
• Shock resistance     500m/s2 for 10 times each in X, Y, and Z directions
• Degree of protection     IEC60529: IP67
• Company standard: Oil-proof