Newport Electronics HHCT-1 Calibrator / Thermometer K-J-T Thermocouple

Newport Electronics HHCT-1 Calibrator / Thermometer K-J-T Thermocouple

Display: 5-digit LCD custom indicators for calibration type, units hold, recall, store, operating mode, bal, loaded memory locations (up to 10)

Keypad: Momentary switches with tactile feedback, select power, thermocouple type, units, resolution, hold, store/recall, stop/clear, operating mode

Configuration Retention: selected operating mode, thermocouple type, units, resolution and memory contents retained on power off

Diagnostics: low battery, open input, invalid keypad entry, out of range, internal hardware fault

Accuracy: see ordering matrix in pdf spec sheet for details

Ambient Temperature: 0 to 50°C (32 to 122°F), 0 to 90% RH

Reading Rate: 1 per second

Input Current: 50 nA typical (meter mode)

Output Load: 100 ohms, min. (calibrator mode)

Max. Common Mode Voltage: 42 V peak to earth ground

Power: 42 V MAX

Battery Life: 16 hrs alkaline (batteries not included)

Dimensions: 178 H x 74 W x 28 mm D (7.0 x 2.9 x 1.1")

Weight: 340 g (12 oz)

NOTE: Meter only with stand, and wrist strap only - thermocouples NOT included