Home›Products›Power Supplies & Power Distribution›Modular & Rack-Mount Power Supplies›af 15V, 10A Power-One LK4501-7R / LK-4501-7R AC-DC Converter BRAND NEW / NOS, 15 V, 10 Amp rm
af 15V, 10A Power-One LK4501-7R / LK-4501-7R AC-DC Converter BRAND NEW / NOS, 15 V, 10 Amp rm
sku70347 in stock
$650.00CAD
By Power-One
<p>Power-One LK45017R / LK 4501-7R AC-DC Converter</p><p>Input: 100-240 V, 2.7A, 50-60 Hz</p><p>Output: 15V, 10A</p><p>Features include full power factor correction, good hold-up time, high efficiency and reliability, low output noise, and excellent dynamic response to load/line changes. The c…
Description
<p>Power-One LK45017R / LK 4501-7R AC-DC Converter</p><p>Input: 100-240 V, 2.7A, 50-60 Hz</p><p>Output: 15V, 10A</p><p>Features include full power factor correction, good hold-up time, high efficiency and reliability, low output noise, and excellent dynamic response to load/line changes.
The converters are protected against surges and transients occurring at the source lines. Input over- and undervoltage lockout circuitry disables the outputs, when the input voltage is outside of the specified range. Input inrush current limitation is included for preventing circuit breakers and fuses from tripping at switch-on.
All outputs are overload, open- and short-circuit proof, and protected by a built-in suppressor diode. The outputs can be inhibited by a logic signal applied to connector pin 18. If the inhibit function is not used, pin 18 must be connected with pin 14 to enable the outputs.
LED indicators display the status of the converter and allow visual monitoring of the system at any time.</p>
The converters are protected against surges and transients occurring at the source lines. Input over- and undervoltage lockout circuitry disables the outputs, when the input voltage is outside of the specified range. Input inrush current limitation is included for preventing circuit breakers and fuses from tripping at switch-on.
All outputs are overload, open- and short-circuit proof, and protected by a built-in suppressor diode. The outputs can be inhibited by a logic signal applied to connector pin 18. If the inhibit function is not used, pin 18 must be connected with pin 14 to enable the outputs.
LED indicators display the status of the converter and allow visual monitoring of the system at any time.</p>